GT1585HT

GT1585HT™

Premium Cold Weather Construction Seaming Tape

GT1585HT™ cold weather construction seaming tape by ProTech Global is a premium grade polyester (PET) tape with cold weather solvent acrylic adhesive, designed to seal seams on house-wrap materials and insulated sheathing. It can also be used for other construction and insulated vapour barrier materials.

Manufactured with the construction industry in mind its component parts are purposefully created for todays’ demanding environments, ensuring that this premium cold weather construction seaming tape excels in extreme cold as well as high heat and humidity conditions, providing a reliable, long lasting and cost effective solution for the industry.


  • Gt1599ht website
  • gt1585ht2
  • Gt1599ht website
  • gt1585ht2


Typical Applications

Typical applications for GT1585HT™ cold weather construction seaming tape. Widely used by construction professionals as a closure system and vapour seal on both exterior and interior house-wrap and sheathing materials. Also used for the jointing and sealing of cement particle board, polythene sheeting and flexible duct.

Also used in other industrial applications requiring a cold weather construction seaming tape with similar characteristics and benefits. Please check with a technical product expert to determine suitability for a particular purpose prior to use.

  • Joint sealing of housewrap materials
  • Sealing of flexible duct joints
  • Jointing of polythene sheeting
  • Jointing of metal to metal sheeting and connections
  • Sealing of cement particle board joints

GT1585HT™ Product Data

Item Value
Adhesive Solvent Acrylic
Backing Thickness 38 micron
Total Thickness 80 micron
Adhesion to Steel 15 N/25 mm
Tack Rolling Ball 5.0 cm
Tensile Strength 110 N/25 mm
Elongation 100%
Service Temperature -30˚C to +100˚C
Operating Temperature +10˚C to +40˚C

GT1585HT™ Information

GT1585HT™ Features

  • Extremely high-quality solvent acrylic high tack adhesive offering reliable and durable sealing and bonding characteristics for house-wrap and sheathing materials.
  • Performs well over a wide range of environmental conditions, excelling in both hot, cold and high humidity conditions. Mould and moisture resistant.
  • Tough and durable, yet hand tearable for ease of use.

Available Sizes

GT1585HT™ cold weather construction seaming tape is available in 48, 63 & 72 mm roll widths.

All rolls are manufactured in 45m lengths

Available Colours

GT1585HT™ cold weather construction seaming tape is available in red, green, blue, black & white

Surface Preparation

Ensure all surfaces are dry and clean, free from dirt, dust, grease, oil and silicones.

Ensure firm pressure is applied to the construction seaming tape to provide the best adhesive bond, and that sufficient tape is applied (of at least 25mm) either side of joints to provide a long-lasting seal.

Application

Remove the release paper from the section of GT1585HT™ cold weather construction seaming tape, taking care not to touch the adhesive surface.

Align the tape centrally over the join. Pull the tape taut and then press down firmly over the entire joint area.

Rub the tape to remove any wrinkles or folds.

Product Shelf Life

12 months when stored in original, unopened packaging at 21˚C (70˚F) / 50% relative humidity, and kept out of direct sunlight.

GT1585HT™ cold weather construction seaming tape

Related Products

Data Sheets & Downloads

Looking for a data sheet or an installation guide for our GT1585HT™ cold weather construction seaming tape product, then the following downloads might come in handy.


gt1585ht
gt1585ht
GT1585HT™ Cold Weather Construction Seaming Tape Technical Data Sheet175 Kb Download .pdf

GT1625HT

GT1625HT™

Premium FSK (Foil/Scrim/Kraft) Aluminium Foil Facing Tape

GT1625HT™ is a premium grade tri-directional reinforced aluminium foil FSK facing tape (foil/scrim/kraft) protected by an easy release silicone paper. Specifically designed to match FSK faced insulation materials, this high performance adhesive tape is fire retardant and mold resistant.

Being a lamination of aluminium foil, kraft paper, and reinforced fibreglass, this cost effective aluminium foil FSK facing tape product is manufactured to the highest of specifications providing a protective insulative barrier against heat, cold, dust and moisture. The high performance pressure sensitive adhesive provides a long term adhesive bond which excels in both very cold and high humidity environments, making it an ideal choice for the sealing of FSK foil faced insulation materials in the HVAC sectors.


  • Gt1625ht website
  • Gt1625ht website


Typical Applications

Typical applications for GT1625HT™ reinforced aluminium foil FSK facing tape. Widely used in the HVAC industry for joining and sealing of FSK faced insulation materials, fibreglass blankets, duct board, pipe sections and seams. Used in both internal and external applications.

Also used in other industrial applications requiring an aluminium foil FSK facing tape with similar characteristics and benefits. Please check with a technical product expert to determine suitability for a particular purpose prior to use.

  • Sealing of fibrous ductboard
  • Vapor seal for reinforced aluminum faced fiberglass or mineral wool thermal insulations

GT1625HT™ Product Data

Item Value
Adhesive Solvent Acrylic
Product Thickness 120 micron
Total Thickness 170 micron
Adhesion to Steel 15 N/25 mm
Tack Rolling Ball 15 cm
Tensile Strength 120 N/25 mm
Elongation 1%
Service Temperature -30˚C to +80˚C
Operating Temperature +10˚C to +40˚C
Fire Rating Class 0 & 25 / 50

GT1625HT™ Information

GT1625HT™ Features

  • Aluminium backing providing excellent reflection of both heat and light sources.
  • Extremely high-quality solvent acrylic high tack adhesive offering reliable and durable sealing and bonding characteristics at extreme cold and high humidity environments.
  • Excellent aging resistance for both internal and external applications
  • Epoxy resin coating contributes to good surface anti-corrosive characteristics against moisture and mould.

Available Sizes

GT1625HT™ reinforced aluminium foil FSK facing tape is available in 2", 3" & 4" roll widths.

All rolls are manufactured in 50 yard lengths

Available Colours

GT1625HT™ reinforced aluminium foil FSK facing tape is available in a bright aluminium finish

Surface Preparation

Ensure all surfaces are dry and clean, free from dirt, dust, grease, oil and silicones.

Ensure firm pressure is applied to the tape to provide the best adhesive bond, and that sufficient tape is applied (of at least 25mm) either side of joints to provide a long-lasting seal.

Application

Remove the release paper from the section of GT1625HT™ reinforced aluminium foil FSK facing tape, taking care not to touch the adhesive surface.

Align the tape centrally over the join. Pull the tape taut and then press down firmly over the entire joint area.

Rub the tape to remove any wrinkles or folds.

Product Shelf Life

12 months when stored in original, unopened packaging at 21˚C (70˚F) / 50% relative humidity, and kept out of direct sunlight.

GT1625HT™ reinforced aluminium foil FSK facing tape

Related Products

Data Sheets & Downloads

Looking for a data sheet or an installation guide for our GT1625HT™ reinforced aluminium foil FSK facing tape product, then the following downloads might come in handy.


gt1625ht
gt1625ht
Technical Data Sheet GT1625HT™ FSK Facing Tape176 Kb Download .pdf
gt1525ht
Technical Data Sheet US GT1625HT™ FSK Facing Tape176 Kb Download .pdf

GT30HT

GT30HT™

Premium High Tack Cold Weather Aluminium Foil Tape

GT30HT™ is the premium aluminium foil cold weather tape. Manufactured to the highest of specifications and coated with a solvent acrylic pressure sensitive instant grab adhesive, this conformable dead soft aluminium foil jointing tape can be easily moulded to irregular surfaces, maintaining insulation efficiency by protecting against the effects of fire, moisture and dust.

Designed with today’s demanding application requirements in mind, this premium grade cold weather tape product exhibits superior standards of reliability, strength and durability whilst excelling in demanding temperature and humidity applications, making GT30HT the premium aluminium hi tack cold weather tape of choice for extreme environments.


  • gt30ht 1
  • gt30ht 10
  • gt30ht 11
  • gt30ht 12
  • gt30ht 19
  • gt30ht 2
  • gt30ht 3
  • gt30ht 1
  • gt30ht 10
  • gt30ht 11
  • gt30ht 12
  • gt30ht 19
  • gt30ht 2
  • gt30ht 3


Typical Applications

Typical applications for GT30HT™ aluminium foil cold weather tape. Widely used in the HVAC industry for jointing and sealing of foil-scrim faced laminated fibreglass blankets, duct board, pipe sections and seams. Extensively used but not limited to joining and sealing of flexible air duct seams and connections, in both internal and external applications.

Also used in other industrial applications requiring a cold weather tape with similar characteristics and benefits. Please check with a technical product expert to determine suitability of this cold weather aluminium foil tape for a particular purpose prior to use.

  • For the jointing and sealing of foil faced insulation materials
  • Providing a complete vapour seal within the HVAC industry
  • Jointing tape for foil faced structural insulation boards and flexible rolls
  • Sealing of flexible duct insulation

GT30HT™ Product Data

Item Value
Adhesive Solvent Acrylic
Product Thickness 30 micron
Total Thickness 70 micron
Adhesion to Steel 15 N/25 mm
Tensile Strength 45 N/25 mm
Tack Rolling Ball 5 cm
Elongation 3%
Service Temperature -35˚C to +120˚C
Application Temperature -20˚C to +40˚C
Fire Rating Class 0

GT30HT™ Information

Features of GT30HT™ Aluminium Foil Tape

  • Aluminium backing providing excellent reflection of both heat and light.
  • Cold weather tape with moderate adhesion offering excellent sealing and bonding on joints and seams in HVAC ductwork applications.
  • Excellent aging resistance for both internal and external applications.
  • Low moisture vapour transmission rate offers excellent sealing and patching performance.

Available Sizes

Our cold weather aluminium foil tape - GT30HT™ is available in 48, 72 & 96mm roll widths.

All rolls are manufactured in 45m lengths

Available Colours

GT30HT™ cold weather aluminium foil jointing tape is available in a bright aluminium foil finish

Surface Preparation

Ensure all surfaces are dry and clean, free from dirt, dust, grease, oil and silicones.

Ensure firm pressure is applied to the aluminium foil tape to provide the best adhesive bond, and that sufficient tape is applied (of at least 25mm) either side of joints to provide a long-lasting seal.

Foil Tape Application

Remove the release paper from the section of GT30HT™ tape, taking care not to touch the adhesive surface.

Align the tape centrally over the join. Pull the tape taut and then press down firmly over the entire joint area.

Rub the tape to remove any wrinkles or folds.

Product Shelf Life

12 months when stored in original, unopened packaging at 21˚C (70˚F) / 50% relative humidity, and kept out of direct sunlight.

GT30HT™ - cold weather tape

Markets

  • Asbestos abatement
  • Construction
  • HVAC
  • Process plant
  • Marine & offshore

Related Products

Data Sheets & Downloads

Looking for a data sheet or an installation guide for our GT30HT™ cold weather foil tape, then the following downloads might come in handy.


“GT30HT
GT30HT
Technical Data Sheet GT30HT™141 Kb Download .pdf

Material Safety Data Sheet

“GT30HT
GT30HT™ Material Safety Data Sheet198 Kb Download .pdf

GT30R

GT30R™

Superior Seal Rubber-based Adhesive Foil Jointing Tape

Manufactured to the highest of specifications and coated with a high tack synthetic rubber adhesive - GT30R™ is a market leading superior seal rubber adhesive aluminium foil tape product for use in multiple sectors. This conformable dead soft rubber adhesive aluminium foil tape exhibits instant grab and can be easily moulded to any profile, maintaining insulation efficiency by protecting against the effects of fire, moisture and dust.

GT30R™ meets with today’s demanding application requirements by providing superior standards of reliability, strength and durability with its key characteristics promoting the optimum balance of surface conformity and tensile strength making it the ideal choice for the jointing of foil faced insulation materials, metal and duct sealing, asbestos abatement and other general purpose applications.


  • gtr30 1
  • gtr30 10
  • gtr30 17
  • gtr30 18
  • gtr30 19
  • gtr30 2
  • gtr30 27
  • gtr30 28
  • gtr30 8
  • gtr30 9
  • gtr30 1
  • gtr30 10
  • gtr30 17
  • gtr30 18
  • gtr30 19
  • gtr30 2
  • gtr30 27
  • gtr30 28
  • gtr30 8
  • gtr30 9


Typical Applications

Typical applications for GT30R™ rubber adhesive aluminium foil tape. Widely used in the HVAC industry for jointing tape, and the sealing of foil-scrim faced laminated fibreglass blankets, duct board, pipe sections and seams. This rubber adhesive aluminium foil tape is extensively used but not limited to jointing and sealing of flexible air duct seams and connections, in both internal and external applications.

Also used in other industrial applications requiring a rubber adhesive aluminium foil tape with similar characteristics and benefits. Please check with a technical product expert to determine the suitability of this foil tape for a particular purpose prior to use.

  • For jointing and sealing of foil faced insulation materials
  • Joint sealing of housewrap materials
  • Sealing of flexible duct insulation
  • Jointing of metal to metal sheeting and connections
  • General purpose applications

GT30R™ Product Data

Item Value
Adhesive Synthetic Rubber
Product Thickness 30 micron
Total Thickness 90 micron
Adhesion to Steel 25 N/25 mm
Tensile Strength 55 N/25 mm
Elongation 3%
Tack Rolling Ball 10cm
Service Temperature -20˚C to 80˚C
Application Temperature 10˚C to 40˚C
Fire Rating Class 0

GT30R™ Information

GT30R™ Foil Tape Features

  • Aluminium backing rubber adhesive foil tape providing excellent reflection of both heat and light.
  • Extremely high-quality rubber adhesive aluminium foil tape with superior strength high tack adhesion offering reliable and durable sealing and bonding characteristics.
  • Excellent aging resistance for both internal and external applications.
  • Low moisture vapour transmission rate offers excellent vapour barrier for sealing and patching performance.

Available Sizes

GT30R™ rubber adhesive aluminium foil tape is available in 48, 72 & 96 mm roll widths.

All rolls are manufactured in 45m lengths

Available Colours

GT30R™ rubber adhesive aluminium foil tape is available in a bright aluminium finish

Surface Preparation

Ensure all surfaces are dry and clean, free from dirt, dust, grease, oil and silicones.

Ensure firm pressure is applied to the rubber adhesvie aluminium foil tape to provide the best adhesive bond, and that sufficient tape is applied (of at least 25mm) either side of joints to provide a long-lasting seal.

Application

Remove the release paper from the section of GT30R™ rubber adhesive aluminium foil tape, taking care not to touch the rubber adhesive surface.

Align the aluminium foil tape centrally over the join. Pull the tape taut and then press down firmly over the entire joint area.

Rub the tape to remove any wrinkles or folds.

Product Shelf Life

12 months when stored in original, unopened packaging at 21˚C (70˚F) / 50% relative humidity, and kept out of direct sunlight.

GT30R™️ Rubber Adhesive Aluminium Foil Tape

Markets

  • Asbestos abatement
  • Construction
  • HVAC
  • Process plant
  • Marine & offshore

Related Products

Data Sheets & Downloads

Looking for a data sheet or an installation guide for our GT30R™ rubber adhesive aluminium foil tape product, then the following downloads might come in handy.


gt30r
gt30r
GT30R™️ Technical Data Sheet Rubber Adhesive Aluminium Foil Tape176 Kb Download .pdf

GT40HT

GT40HT™

40 Micron Cold Weather High Tack Aluminium Foil Tape

GT40HT™ is a premium 40 micron cold weather adhesive aluminium foil tape. Manufactured to the highest of specifications and coated with a high tack solvent acrylic pressure sensitive instant grab adhesive, this conformable dead soft 40 micron aluminium foil tape can be easily moulded to irregular surfaces, maintaining insulation efficiency by protecting against the effects of fire, moisture and dust.

Designed with today’s demanding application requirements in mind, this premium grade 40 micron aluminium foil tape product exhibits superior standards of reliability, strength and durability whilst excelling in demanding temperature and humidity applications, making GT40HT the foil tape of choice for extreme environments.


  • gt40ht website
  • gt40ht website


Typical Applications

Typical applications for GT40HT™ 40 micron aluminium foil tape. Widely used in the HVAC industry for jointing and sealing of foil-scrim faced laminated fibreglass blankets, duct board, pipe sections and seams. This 40 micron cold weather aluminium foil tape is extensively used but not limited to jointing and sealing of flexible air duct seams and connections, in both internal and external applications.

Also used in other industrial applications requiring a cold weather aluminium foil tape with similar characteristics and benefits. Please check with a technical product expert to determine the suitability for this 40 micron foil tape for a particular purpose prior to use.

  • Provide complete vapour seal within the HVAC industry
  • Jointing tape for foil faced structural insulation boards and flexible rolls
  • Sealing of flexible duct insulation

GT40HT™ Product Data

Item Value
Adhesive Solvent Acrylic
Product Thickness 40 micron
Total Thickness 80 micron
Adhesion to Steel 15 N/25 mm
Tensile Strength 55 N/10 mm
Tack Rolling Ball 5 cm
Elongation 3%
Service Temperature -35˚C to +120˚C
Operating Temperature -20˚C to +40˚C
Fire Rating  Class 0

GT40HT™ Information

GT40HT™ Features

  • Aluminium backing providing excellent reflection of both heat and light.
  • 40 micron aluminium foil tape with high tack cold weather adhesive with moderate adhesion offering excellent sealing and bonding on joints and seams in HVAC ductwork applications.
  • Excellent aging resistance for both internal and external applications.
  • Low moisture vapour transmission rate offers excellent sealing and patching performance.

Available Sizes

GT40HT™ 40 micron aluminium foil tape with cold weather adhesvise is available in 48, 72 & 96mm roll widths.

All rolls are manufactured in 45m lengths

Available Colours

GT40HT™ 40 micron aluminium foil tape with cold weather adhesvise is available in a bright aluminium foil finish

Surface Preparation

Ensure all surfaces are dry and clean, free from dirt, dust, grease, oil and silicones.

Ensure firm pressure is applied to the high tack foil tape to provide the best adhesive bond, and that sufficient tape is applied (of at least 25mm) either side of joints to provide a long-lasting seal.

Application

Remove the release paper from the section of GT40HT™ high tack aluminium foil tape, taking care not to touch the cold weather adhesive surface.

Align the tape centrally over the join. Pull the tape taut and then press down firmly over the entire joint area.

Rub the tape to remove any wrinkles or folds.

Product Shelf Life

12 months when stored in original, unopened packaging at 21˚C (70˚F) / 50% relative humidity, and kept out of direct sunlight.

Related Products

Data Sheets & Downloads

Looking for a data sheet or an installation guide for our GT40HT™ cold weather aluminium foil tape product, then the following downloads might come in handy.


gt40ht
gt40ht
Technical Data Sheet GT40HT™ 40 Micron Cold Weather Aluminium Foil Tape139 Kb Download .pdf

GT50HT

GT50HT™

50 Micron (2.0 mil) Cold Weather High Tack Foil Tape

GT50HT™ is the premium high tack 50 micron cold weather aluminium foil tape. Manufactured to the highest of specifications and coated with a high tack solvent acrylic pressure sensitive instant grab adhesive, this conformable dead soft 50 micron cold weather aluminium foil tape can be easily moulded to irregular surfaces, maintaining insulation efficiency by protecting against the effects of fire, moisture and dust.

Designed with today’s demanding application requirements in mind, this premium grade cold weather aluminium foil tape product exhibits superior standards of reliability, strength and durability whilst exceling in demanding temperature and humidity applications, making GT50HT™ the tape of choice for extreme environments.


  • gt50ht website
  • gt50ht website


Typical Applications

Typical applications for GT50HT™ 50 micron cold weather aluminium foil tape. Widely used in the HVAC industry for jointing and sealing of foil-scrim faced laminated fibreglass blankets, duct board, pipe sections and seams. GT50HT™ 50 micron cold weather aluminium foil tape is extensively used but not limited to jointing and sealing of flexible air duct seams and connections, in both internal and external applications

Also used in other industrial applications requiring a 50 micron cold weather aluminium foil tape with similar characteristics and benefits. Please check with a technical product expert to determine suitability for a particular purpose prior to use.

  • Provide complete vapour seal within the HVAC industry
  • Jointing tape for foil faced structural insulation boards and flexible rolls
  • Sealing of flexible duct insulation

GT50HT™ Product Data

Item Value
Adhesive Solvent Acrylic
Product Thickness 50 micron
Total Thickness 90 micron
Adhesion to Steel 15 N/25 mm
Tensile Strength 45 N/25 mm
Tack Rolling Ball 5 cm
Elongation 3%
Service Temperature -35˚C to +120˚C
Operating Temperature -20˚C to +40˚C
Fire Rating Class 0

GT50HT™ Information

GT50HT™ Features

  • Aluminium backing providing excellent reflection of both heat and light.
  • 50 micron cold weather high tack adhesive with moderate adhesion offering excellent sealing and bonding on joints and seams in HVAC ductwork applications.
  • Excellent aging resistance for both internal and external applications.
  • Low moisture vapour transmission rate offers excellent sealing and patching performance.

Available Sizes

GT50HT™ high tack 50 micron cold weather aluminium foil tape is available in 2, 3 & 4in roll widths.

All rolls are manufactured in 50 yard lengths

Available Colours

GT50HT™ high tack 50 micron cold weather aluminium foil tape is available in a bright aluminium foil finish

Surface Preparation

Ensure all surfaces are dry and clean, free from dirt, dust, grease, oil and silicones.

Ensure firm pressure is applied to the high tack 50 micron cold weather aluminium foil tape to provide the best adhesive bond, and that sufficient tape is applied (of at least 25mm) either side of joints to provide a long-lasting seal.

Application

Remove the release paper from the section of GT50HT™ high tack cold weather aluminium foil tape, taking care not to touch the adhesive surface.

Align the tape centrally over the join. Pull the tape taut and then press down firmly over the entire joint area.

Rub the tape to remove any wrinkles or folds.

Product Shelf Life

12 months when stored in original, unopened packaging at 21˚C (70˚F) / 50% relative humidity, and kept out of direct sunlight.

GT50HT™ high tack 50 micron cold weather aluminium foil tape

Related Products

Data Sheets & Downloads

Looking for a data sheet or an installation guide for our 50 micron GT50HT™ tape product, then the following downloads might come in handy.


gt50ht
gt50ht
Technical Data Sheet GT50HT™142 Kb Download .pdf
gt50ht
Technical Data Sheet GT50HT™ US142 Kb Download .pdf

GT8025HT

GT8025HT™

Premium Cold Weather ASJ Facing Tape For All Service Jacket Insulation

GT8025HT™ premium cold weather ASJ facing tape - All Service Jacketing, is a flexible high performance tape with an easy release silicone liner, scrim and foil backing. Designed to match ASJ faced insulation materials it achieves a long term bond from the inherent characteristics of its high performant pressure sensitive solvent acrylic adhesive specially formulated to provide a reliable and durable fix in both cold and hot humid environments.

This conformable tape can be easily moulded to irregular surfaces, maintaining insulation efficiency by protecting against the effects of fire, moisture and dust. Used as a permanent closure system and vapour barrier seal on ASJ faced insulation duct, pipe systems, and for the sealing and repairing in refrigerated applications.


  • new 1600 0003 Gt8025ht- tape
  • new 1600 0003 Gt8025ht- tape


Typical Applications

Typical applications for GT8025HT™ premium cold weather ASJ facing tape. Widely used in the HVAC industry for joining and sealing of FSK faced insulation materials, fibreglass blankets, duct board, pipe sections and seams. Used in both internal and external applications.

Also used in other industrial applications requiring a premium cold weather ASJ facing tape with similar characteristics and benefits. Please check with a technical product expert to determine suitability for a particular purpose prior to use.

  • Sealing of fibrous ductboard
  • Vapor seal for reinforced aluminum faced fiberglass or mineral wool thermal insulations
  • Sealing of ASJ faced insulation

GT8025HT™ Product Data

Item Value
Adhesive Solvent Acrylic
Product Thickness 125 micron
Total Thickness 175 micron
Elongation 1%
Tack Rolling Ball XX cm
Tensile Strength 215 N/25 mm
Adhesion to Steel 120 N/25 mm
Service Temperature -30˚C to +80˚C
Operating Temperature +10˚C to +40˚C

GT8025HT™ Information

GT8025HT™ Features

  • Extremely high-quality solvent acrylic high tack adhesive offering reliable and durable sealing and bonding characteristics for ASJ faced insulation.
  • Performs well over a wide range of environmental conditions, excelling in both hot, cold and high humidity conditions.
  • Excellent aging resistance for both internal and external applications.

Available Sizes

GT8025HT™ premium cold weather ASJ facing tape is available in 2", 3" & 4" roll widths.

All rolls are manufactured in 50 yard lengths

Available Colours

GT8025HT™ premium cold weather ASJ facing tape is available in a white finish

Surface Preparation

Ensure all surfaces are dry and clean, free from dirt, dust, grease, oil and silicones.

Ensure firm pressure is applied to the GT8025HT™ premium cold weather ASJ facing tape to provide the best adhesive bond, and that sufficient tape is applied (of at least 25mm) either side of joints to provide a long-lasting seal.

Application

Remove the release paper from the section of GT8025HT™ tape, taking care not to touch the adhesive surface.

Align the tape centrally over the join. Pull the tape taut and then press down firmly over the entire joint area.

Rub the tape to remove any wrinkles or folds.

Product Shelf Life

12 months when stored in original, unopened packaging at 21˚C (70˚F) / 50% relative humidity, and kept out of direct sunlight.

GT8025HT™ premium cold weather ASJ facing tape

Related Products

Data Sheets & Downloads

Looking for a data sheet or an installation guide for our GT8025HT™ premium cold weather ASJ facing tape product, then the following downloads might come in handy.


GT8025HT
GT8025HT
Technical Data Sheet GT8025HT™ Cold Weather ASJ Facing Tape176 Kb Download .pdf
GT8025HT
Technical Data Sheet US GT8025HT™ Cold Weather ASJ Facing Tape176 Kb Download .pdf

GTB65

GTB65™

Premium Reinforced Matt Black Aluminium Foil Tape

GTB65™ is a professional grade reinforced 30 micron matt black aluminium foil tape. This foil / scrim laminate with a bi-directional 5mm x 5mm reinforcement is coated with an aggressive rubber adhesive and protected by an easy release silicone paper.

Being of laminated construction and manufactured to the highest of specifications this professional reinforced matt black aluminium foil tape product is easily conformable to irregular surfaces, providing an effective instant barrier against, heat cold, dust and moisture. GTB65™ is the professional solution for the installer looking for a reinforced matt black aluminium foil tape for interior applications.


  • Gtb65 website
  • Gtb65 website


Typical Applications

Typical applications for GTB65™ reinforced matt black aluminium foil tape. Widely used by the HVAC industry in commercial or entertainment internal voids for the jointing and sealing of foil-scrim faced laminated fibreglass blankets, duct board, pipe sections and seams. GTB65™ reinforced matt black aluminium foil tape is extensively used but not limited to joining and sealing of flexible air duct seams and connections, where design requirements are sympathetic to their environment and aesthetics are of a paramount requirement.

Also used in other industrial applications requiring a reinforced matt black aluminium foil tape with similar characteristics and benefits. Please check with a technical product expert to determine suitability for a particular purpose prior to use.

  • Jointing and sealing of HVAC ducting systems, for interior use only.
  • Invisible repairs where a matt black finsihed is required.
  • Perfect for use in the arts and entertainments, and appliance industries.
  • Strong and conformable.

GTB65™ Product Data

Item Value
Adhesive Synthetic Rubber
Product Thickness 30 micron
Elongation 3-5%
Tensile Strength 220 N/50mm
Peel Adhesion 32 N/25mm
Shear Adhesion 36 N/25mm
Service Temperature -20˚C to +75˚C
Operating Temperature 10˚C to +35˚C

GTB65™ Information

GTB65™ Features

  • Cold weather adhesive with moderate adhesion offering excellent sealing and bonding on foil-scrim facing joints and seam in HVAC ductwork applications.
  • Excellent aging resistance for internal applications.
  • Low moisture vapour transmission rate offers excellent sealing and patching performance.
  • Perfect for invisible repairs of matt black surfaces.

Available Sizes

GTB65™ reinforced matt black aluminium foil tape is available in 50, 75, 100, 600 & 1200mm roll widths.

All rolls are manufactured in 50m lengths

Available Colours

GTB65™ reinforced matt black aluminium foil tape is available in a matt black finish

Surface Preparation

Ensure all surfaces are dry and clean, free from dirt, dust, grease, oil and silicones.

Ensure firm pressure is applied to the tape to provide the best adhesive bond, and that sufficient tape is applied (of at least 25mm) either side of joints to provide a long-lasting seal.

Application

Remove the release paper from the section of GTB65™ reinforced matt black aluminium foil tape , taking care not to touch the adhesive surface.

Align the tape centrally over the join. Pull the tape taut and then press down firmly over the entire joint area.

Rub the aluminium foil tape to remove any wrinkles or folds.

Product Shelf Life

12 months when stored in original, unopened packaging at 21˚C (70˚F) / 50% relative humidity, and kept out of direct sunlight.

GTB65™ reinforced matt black aluminium foil tape

Related Products

Data Sheets & Downloads

Looking for a data sheet or an installation guide for our GTB65™ reinforced matt black aluminium foil tape product, then the following downloads might come in handy.


gtb65
gtb65
Technical Data Sheet GTB65™ Reinforced Matt Black Aluminium Foil Tape139 Kb Download .pdf

GTR55

GTR55™

Reinforced Cold Weather Aluminium Foil Tape

GTR55™ manufactured with a reinforced scrim foil is easy to apply and the perfect solution for those challenging environments where an increased strength foil faced premium tape product is required.

Complementing our market leading range of premium aluminium foil tape products, this superior reinforced cold weather aluminium foil tape, manufactured to the highest specifications benefits from a reinforced 5mm²glass scrim and kraft paper. Coated with an aggressive pressure sensitive solvent acrylic the final bond has high shear strength exhibiting superior standards of reliability, strength and durability, promoting the optimum balance of surface conformity and tensile strength making it the perfect choice for the sealing of foil faced insulation materials, rigid board and pipe section, mineral wool slab, rolls and pipe sections in the heating ventilation & air conditioning sectors.


  • gtr55 1
  • gtr55 2
  • gtr55 3
  • gtr55 4
  • gtr55 5
  • gtr55 6
  • gtr55 7
  • gtr55 8
  • gtr55 1
  • gtr55 2
  • gtr55 3
  • gtr55 4
  • gtr55 5
  • gtr55 6
  • gtr55 7
  • gtr55 8


Typical Applications

Typical applications for GTR55™ reinforced cold weather aluminium foil tape. Widely used in the HVAC industry for joinying and sealing of foil-scrim faced laminated fibreglass blankets, duct board, pipe sections and seams. Extensively used but not limited to jointing and sealing of flexible air duct seams and connections.

Also used in other industrial applications requiring a scrim reinforced cold weather aluminium foil tape with similar characteristics and benefits. Please check with a technical product expert to determine suitability for a particular purpose prior to use.

  • For the jointing and sealing of foil-scrim facing laminated fibregalss blanket, duct board and pipe section joints.
  • Sealing of flexible air duct seams and connections
  • Sealing of rigid board, mineral wool slabs or rolls within HVAC, constrcution and Industrial markets.

GTR55™ Product Data

Item Value
Adhesive Solvent Acrylic
Product Thickness 43 micron
Total Thickness 83 micron
Adhesion to Steel 15 N/25 mm
Tack Rolling Ball 5 cm
Tensile Strength 100 N/25 mm
Elongation 3%
Service Temperature -30˚C to +120˚C
Operating Temperature +10˚C to +40˚C

GTR55™ Information

GTR55™ Features

  • Aluminium with fibreglass scrim backing providing excellent reflection of both heat and light.
  • Cold weather adhesive with moderate adhesion offering excellent sealing and bonding on foil-scrim facing joints and seam in HVAC ductwork applications.
  • Excellent aging resistance for both internal and external applications.
  • Low moisture vapour transmission rate offers excellent sealing and patching performance.

Available Sizes

GTR55™ reinforced cold weather aluminium foil tape is available in 48, 72 & 96mm roll widths.

All rolls are manufactured in 50m lengths

Available Colours

GGTR55™ reinforced cold weather aluminium foil tape is available in a bright aluminium finish

Surface Preparation

Ensure all surfaces are dry and clean, free from dirt, dust, grease, oil and silicones.

Ensure firm pressure is applied to the aluminium foil tape to provide the best adhesive bond, and that sufficient tape is applied (of at least 25mm) either side of joints to provide a long-lasting seal.

Application

Remove the release paper from the section of GTR55™ reinforced cold weather aluminium foil tape, taking care not to touch the adhesive surface.

Align the tape centrally over the join. Pull the tape taut and then press down firmly over the entire joint area.

Rub the tape to remove any wrinkles or folds.

Product Shelf Life

12 months when stored in original, unopened packaging at 21˚C (70˚F) / 50% relative humidity, and kept out of direct sunlight.

GTR55™ reinforced cold weather aluminium foil tape

Related Products

Data Sheets & Downloads

Looking for a data sheet or an installation guide for our GTR55™ reinforced cold weather aluminium foil tape, then the following downloads might come in handy.


“GT30HT
“GTR55 width=
Technical Data Sheet GTR55™160 Kb Download .pdf

Material Safety Data Sheet

GTR55” width=
GTR55™ Material Safety Data Sheet198 Kb Download .pdf

MB30

MB30™

Premium Matt Black Foil Tape For Interior Applications

MB30™ is a professional grade 30 micron aluminium matt black foil tape. This premium grade matt black foil tape product is coated with a high performance synthetic rubber adhesive and protected by an easy release silicone paper.

Manufactured to the highest of specifications this professional matt black foil tape is easily conformable to irregular surfaces, providing an effective instant barrier against, heat cold, dust and moisture. MB30™ is the professional solution for the installer looking for a matt black aluminium faced tape for interior applications.


  • new 1600 0004 mb30
  • new 1600 0004 mb30


Typical Applications

Typical applications for MB30™ matt black foil tape. Widely used by the HVAC industry in commercial or entertainment internal voids for the joining and sealing of intersections on matt black surfaces, the jointing and sealing of duct board, pipe sections and seams. MB30™ matt black foil tape is extensively used but not limited to joining and sealing of flexible air duct seams and connections, where design requirements are sympathetic to their environment and aesthetics are of a paramount importance.

Also used in other industrial applications requiring a matt black foil tape with similar characteristics and benefits. Please check with a technical product expert to determine suitability for a particular purpose prior to use.

  • For sealing intersections on matt black surfaces. For interior use only.
  • Invisible repairs where a matt black finished is required.
  • Perfect for use in the arts and entertainments, and appliance industries.
  • Suitable as assembly aid for rubber system sealings.
  • Strong adhesive suitable for construction.

Mb30™ Product Data

Item Value
Adhesive Synthetic Rubber
Product Thickness 30 micron
Total Thickness 50 micron
Elongation 3-5%
Tensile Strength 1.2 N /cm
Adhesion to Steel 32 N/25mm
Temperature Stability -20˚C to +75˚C
Adhesion to Background 36 N/25mm

MB30™ Information

MB30™ Features

  • Synthetic rubber adhesive with moderate adhesion offering excellent sealing and bonding of joints and seams in internal HVAC ductwork applications.
  • Excellent aging resistance for internal applications.
  • Low moisture vapour transmission rate offers excellent sealing and patching performance.
  • Perfect for invisible repairs of matt black surfaces.

Available Sizes

MB30™ matt black foil tape is available in 50, 75, 100, 600 & 1200mm roll widths.

All rolls are manufactured in 50m lengths

Available Colours

MB30™ matt black foil tape is available in a matt black finish

Surface Preparation

Ensure all surfaces are dry and clean, free from dirt, dust, grease, oil and silicones.

Ensure firm pressure is applied to the matt black foil tape to provide the best adhesive bond, and that sufficient tape is applied (of at least 25mm) either side of joints to provide a long-lasting seal.

Application

Remove the release paper from the section of MB30™ matt black foil tape, taking care not to touch the rubber adhesive surface.

Align the tape centrally over the join. Pull the tape taut and then press down firmly over the entire joint area.

Rub the tape to remove any wrinkles or folds.

Product Shelf Life

12 months when stored in original, unopened packaging at 21˚C (70˚F) / 50% relative humidity, and kept out of direct sunlight.

MB30™ matt black foil tape

Related Products

Data Sheets & Downloads

Looking for a data sheet or an installation guide for our MB30™ matt black foil tape product, then the following downloads might come in handy.


mb30
mb30
Technical Data Sheet MB30™141 Kb Download .pdf

MF65

MF65™

Tri-Laminate Cryogenic Vapour Barrier Tape

MF65™ is a premium cryogenic vapour barrier tape product. Manufactured as a three-layer lamination of polyester film(12 micron), aluminium foil(25 micron) and polyester film(12 micron), and coated with a cold weather pressure sensitive acrylic adhesive, this premium grade tape product is specifically designed as a vapour barrier in thermal insulations.

This conformable tri-laminate cryogenic vapour barrier tape applies the outstanding chemical characteristics of its polyester and aluminium construction to provide outstanding performance; excelling in extreme cold or humid conditions. Suitable for both internal or external applications and providing a complete vapour stop solution, MF65 cryogenic vapour barrier tape meets the demanding requirements of the today’s professional installers.


  • 1600 MF-65-silver
  • 1600 MF-65-silver


Typical Applications

Typical applications for MF65™ cryogenic vapour barrier tape. Widely used in the HVAC industry as a vapour barrier for the jointing and sealing of insulation materials, fibreglass blankets, duct board, pipe sections and seams. Suited for exterior use applications and for use cases in extreme cold and high humidity environments.

Also used in other industrial applications requiring a cryogenic vapour barrier tape with similar characteristics and benefits. Please check with a technical product expert to determine suitability for a particular purpose prior to use.

  • Laminated aluminium backing providing excellent reflection of both heat and light sources.
  • Extremely high-quality solvent acrylic high tack adhesive offering reliable and durable sealing and bonding characteristics at extreme cold and high humidity environments.
  • Excellent aging resistance for both internal and external applications..

MF65™ Product Data

Item Value
Adhesive Solvent Acrylic
Product Thickness 49 micron
Material Weight 108g/m²
Adhesive Thickness 50 micron
Elongation 63%
Tensile Strength 109 N/15mm
Peel Strength 7.9-N/cm
Water Vapour Permeability   <0.01 g/m² 24hr
Application Temperature -30˚C to +130˚C

MF65™ Information

MF65™ Features

  • Laminated aluminium backing providing excellent reflection of both heat and light sources.
  • Extremely high-quality solvent acrylic high tack adhesive offering reliable and durable sealing and bonding characteristics at extreme cold and high humidity environments.
  • Excellent aging resistance for both internal and external applications.

Available Sizes

MF65™ cryogenic vapour barrier tape is available in 48, 72, 96, 1000 & 1200† mm roll widths.

All rolls are manufactured in 50m and 100m† lengths

Available Colours

MF65™ cryogenic vapour barrier tapeis available in a bright metallic finish

Surface Preparation

Ensure all surfaces are dry and clean, free from dirt, dust, grease, oil and silicones.

Ensure firm pressure is applied to the cryogenic vapour barrier tape to provide the best adhesive bond, and that sufficient tape is applied (of at least 25mm) either side of joints to provide a long-lasting seal.

Application

Remove the release paper from the section of MF65™ cryogenic vapour barrier tape, taking care not to touch the adhesive surface.

Align the tape centrally over the join. Pull the tape taut and then press down firmly over the entire joint area.

Rub the tape to remove any wrinkles or folds.

Product Shelf Life

12 months when stored in original, unopened packaging at 21˚C (70˚F) / 50% relative humidity, and kept out of direct sunlight.

MF65™ cryogenic vapour barrier tape

Related Products

Data Sheets & Downloads

Looking for a data sheet or an installation guide for our MF65™ cryogenic vapour barrier tape product, then the following downloads might come in handy.


mf65
mf65
Technical Data Sheet MF65™️ Cryogenic Vapour Barrier Tape175 Kb Download .pdf

Business Hours

Monday - Friday
09:00 am to 17:00 pm
Saturday
Closed
Sunday
Closed

Closed on public holidays

Email Newsletter

Sign up for the latest ProTech Global Company content, updates, surveys & offers.

Privacy Policy
X

Right Click

No right click