Premium High Tack Cold Weather Aluminium Foil Tape
GT30HT™ is the premium aluminium foil cold weather tape. Manufactured to the highest of specifications and coated with a solvent acrylic pressure sensitive instant grab adhesive, this conformable dead soft aluminium foil jointing tape can be easily moulded to irregular surfaces, maintaining insulation efficiency by protecting against the effects of fire, moisture and dust.
Designed with today’s demanding application requirements in mind, this premium grade cold weather tape product exhibits superior standards of reliability, strength and durability whilst excelling in demanding temperature and humidity applications, making GT30HT the premium aluminium hi tack cold weather tape of choice for extreme environments.
Typical Applications
Typical applications for GT30HT™ aluminium foil cold weather tape. Widely used in the HVAC industry for jointing and sealing of foil-scrim faced laminated fibreglass blankets, duct board, pipe sections and seams. Extensively used but not limited to joining and sealing of flexible air duct seams and connections, in both internal and external applications.
Also used in other industrial applications requiring a cold weather tape with similar characteristics and benefits. Please check with a technical product expert to determine suitability of this cold weather aluminium foil tape for a particular purpose prior to use.
For the jointing and sealing of foil faced insulation materials
Providing a complete vapour seal within the HVAC industry
Jointing tape for foil faced structural insulation boards and flexible rolls
Sealing of flexible duct insulation
GT30HT™ Product Data
Item
Value
Adhesive
Solvent Acrylic
Product Thickness
30 micron
Total Thickness
70 micron
Adhesion to Steel
15 N/25 mm
Tensile Strength
45 N/25 mm
Tack Rolling Ball
5 cm
Elongation
3%
Service Temperature
-35˚C to +120˚C
Application Temperature
-20˚C to +40˚C
Fire Rating
Class 0
GT30HT™ Information
Features of GT30HT™ Aluminium Foil Tape
Aluminium backing providing excellent reflection of both heat and light.
Cold weather tape with moderate adhesion offering excellent sealing and bonding on joints and seams in HVAC ductwork applications.
Excellent aging resistance for both internal and external applications.
Our cold weather aluminium foil tape - GT30HT™ is available in 48, 72 & 96mm roll widths.
All rolls are manufactured in 45m lengths
Available Colours
GT30HT™ cold weather aluminium foil jointing tape is available in a bright aluminium foil finish
Surface Preparation
Ensure all surfaces are dry and clean, free from dirt, dust, grease, oil and silicones.
Ensure firm pressure is applied to the aluminium foil tape to provide the best adhesive bond, and that sufficient tape is applied (of at least 25mm) either side of joints to provide a long-lasting seal.
Foil Tape Application
Remove the release paper from the section of GT30HT™ tape, taking care not to touch the adhesive surface.
Align the tape centrally over the join. Pull the tape taut and then press down firmly over the entire joint area.
Rub the tape to remove any wrinkles or folds.
Product Shelf Life
12 months when stored in original, unopened packaging at 21˚C (70˚F) / 50% relative humidity, and kept out of direct sunlight.
40 Micron Cold Weather High Tack Aluminium Foil Tape
GT40HT™ is a premium 40 micron cold weather adhesive aluminium foil tape. Manufactured to the highest of specifications and coated with a high tack solvent acrylic pressure sensitive instant grab adhesive, this conformable dead soft 40 micron aluminium foil tape can be easily moulded to irregular surfaces, maintaining insulation efficiency by protecting against the effects of fire, moisture and dust.
Designed with today’s demanding application requirements in mind, this premium grade 40 micron aluminium foil tape product exhibits superior standards of reliability, strength and durability whilst excelling in demanding temperature and humidity applications, making GT40HT the foil tape of choice for extreme environments.
Typical Applications
Typical applications for GT40HT™ 40 micron aluminium foil tape. Widely used in the HVAC industry for jointing and sealing of foil-scrim faced laminated fibreglass blankets, duct board, pipe sections and seams. This 40 micron cold weather aluminium foil tape is extensively used but not limited to jointing and sealing of flexible air duct seams and connections, in both internal and external applications.
Also used in other industrial applications requiring a cold weather aluminium foil tape with similar characteristics and benefits. Please check with a technical product expert to determine the suitability for this 40 micron foil tape for a particular purpose prior to use.
Provide complete vapour seal within the HVAC industry
Jointing tape for foil faced structural insulation boards and flexible rolls
Sealing of flexible duct insulation
GT40HT™ Product Data
Item
Value
Adhesive
Solvent Acrylic
Product Thickness
40 micron
Total Thickness
80 micron
Adhesion to Steel
15 N/25 mm
Tensile Strength
55 N/10 mm
Tack Rolling Ball
5 cm
Elongation
3%
Service Temperature
-35˚C to +120˚C
Operating Temperature
-20˚C to +40˚C
Fire Rating
Class 0
GT40HT™ Information
GT40HT™ Features
Aluminium backing providing excellent reflection of both heat and light.
40 micron aluminium foil tape with high tack cold weather adhesive with moderate adhesion offering excellent sealing and bonding on joints and seams in HVAC ductwork applications.
Excellent aging resistance for both internal and external applications.
GT40HT™ 40 micron aluminium foil tape with cold weather adhesvise is available in 48, 72 & 96mm roll widths.
All rolls are manufactured in 45m lengths
Available Colours
GT40HT™ 40 micron aluminium foil tape with cold weather adhesvise is available in a bright aluminium foil finish
Surface Preparation
Ensure all surfaces are dry and clean, free from dirt, dust, grease, oil and silicones.
Ensure firm pressure is applied to the high tack foil tape to provide the best adhesive bond, and that sufficient tape is applied (of at least 25mm) either side of joints to provide a long-lasting seal.
Application
Remove the release paper from the section of GT40HT™ high tack aluminium foil tape, taking care not to touch the cold weather adhesive surface.
Align the tape centrally over the join. Pull the tape taut and then press down firmly over the entire joint area.
Rub the tape to remove any wrinkles or folds.
Product Shelf Life
12 months when stored in original, unopened packaging at 21˚C (70˚F) / 50% relative humidity, and kept out of direct sunlight.
Looking for a data sheet or an installation guide for our GT40HT™ cold weather aluminium foil tape product, then the following downloads might come in handy.
50 Micron (2.0 mil) Cold Weather High Tack Foil Tape
GT50HT™ is the premium high tack 50 micron cold weather aluminium foil tape. Manufactured to the highest of specifications and coated with a high tack solvent acrylic pressure sensitive instant grab adhesive, this conformable dead soft 50 micron cold weather aluminium foil tape can be easily moulded to irregular surfaces, maintaining insulation efficiency by protecting against the effects of fire, moisture and dust.
Designed with today’s demanding application requirements in mind, this premium grade cold weather aluminium foil tape product exhibits superior standards of reliability, strength and durability whilst exceling in demanding temperature and humidity applications, making GT50HT™ the tape of choice for extreme environments.
Typical Applications
Typical applications for GT50HT™ 50 micron cold weather aluminium foil tape. Widely used in the HVAC industry for jointing and sealing of foil-scrim faced laminated fibreglass blankets, duct board, pipe sections and seams. GT50HT™ 50 micron cold weather aluminium foil tape is extensively used but not limited to jointing and sealing of flexible air duct seams and connections, in both internal and external applications
Also used in other industrial applications requiring a 50 micron cold weather aluminium foil tape with similar characteristics and benefits. Please check with a technical product expert to determine suitability for a particular purpose prior to use.
Provide complete vapour seal within the HVAC industry
Jointing tape for foil faced structural insulation boards and flexible rolls
Sealing of flexible duct insulation
GT50HT™ Product Data
Item
Value
Adhesive
Solvent Acrylic
Product Thickness
50 micron
Total Thickness
90 micron
Adhesion to Steel
15 N/25 mm
Tensile Strength
45 N/25 mm
Tack Rolling Ball
5 cm
Elongation
3%
Service Temperature
-35˚C to +120˚C
Operating Temperature
-20˚C to +40˚C
Fire Rating
Class 0
GT50HT™ Information
GT50HT™ Features
Aluminium backing providing excellent reflection of both heat and light.
50 micron cold weather high tack adhesive with moderate adhesion offering excellent sealing and bonding on joints and seams in HVAC ductwork applications.
Excellent aging resistance for both internal and external applications.
GT50HT™ high tack 50 micron cold weather aluminium foil tape is available in 2, 3 & 4in roll widths.
All rolls are manufactured in 50 yard lengths
Available Colours
GT50HT™ high tack 50 micron cold weather aluminium foil tape is available in a bright aluminium foil finish
Surface Preparation
Ensure all surfaces are dry and clean, free from dirt, dust, grease, oil and silicones.
Ensure firm pressure is applied to the high tack 50 micron cold weather aluminium foil tape to provide the best adhesive bond, and that sufficient tape is applied (of at least 25mm) either side of joints to provide a long-lasting seal.
Application
Remove the release paper from the section of GT50HT™ high tack cold weather aluminium foil tape, taking care not to touch the adhesive surface.
Align the tape centrally over the join. Pull the tape taut and then press down firmly over the entire joint area.
Rub the tape to remove any wrinkles or folds.
Product Shelf Life
12 months when stored in original, unopened packaging at 21˚C (70˚F) / 50% relative humidity, and kept out of direct sunlight.
GT50HT™ high tack 50 micron cold weather aluminium foil tape