The Economical Weatherpoof Jacketing System
PROCLAD100™ is the economical multi-layered laminate insulation cladding system, which provides a weatherproof jacketing and cladding system to insulated duct and pipe systems. The multi-laminate has a zero-perm rating to prevent moisture ingress and with increased strength and UV resistance, PROCLAD100™ provides an economical market leading cladding solution. The technically advanced adhesive being solvent free for safe environmentally conscious use, is capable of being applied in wet/humid conditions at extremes of temperatures (-30˚C to +149˚C).
Please find below the key characteristics of our PROCLAD100™ product. For more information and enquiries please get in touch.
PROCLAD100™ Product Data
|Product Thickness||130 microns|
|Tensile Strength||>200 newtons|
|Water Permeability||0.00 g/m2/d|
|Puncture Resistance||>28 newtons|
|Service Temperature||-40˚C to +149˚C|
|Application Temperature||-30˚C to +130˚C|
|Emissivity Value||0.03 to 0.84/td>|
|UV Testing||10 years plus|
|Fire Rating||Class ‘O’|
Product Range & Sizes
|PROCLAD 100EMB||Silver||600 & 1200|
|PROCLAD 100S||Silver||600 & 1200|
All rolls are available in 50m lengths
|1 x 600mm roll equates to 30m²
1 x 1200mm roll equates to 60m²
Ensure all surfaces are dry and clean, free from dirt and dust, grease, oil and silicones. The insulation materials should be installed to industry standards and sealed using one of ProTech Global’s aluminum foil tapes, GT30HT™ or GTR55™.
When applying PROCLAD150™️ ensure that the correct pressure is applied using the plastic
When applying PROCLAD100™️ ensure that the correct pressure is applied using the plastic applicator (provided) as the adhesive is a PSA and requires a firm application to provide a full surface bond.
When placing the cut piece of PROCLAD100™️ in to position, partially peel back the liner to allow correct positioning and then rub down, continue to peel back the liner whilst pressing in to place using the hand to prevent creasing, once the full piece has been applied use the plastic applicator and rub the complete surface to ensure the full adhesive bond required.
Continue to apply PROCLAD100™️ ensuring that a minimum 75mm overlap is observed to the previous piece to ensure a strong weatherproof seal.
ProTech Global Ltd provides detailed method statements for use in various applications, and are available upon request. These must be referred to prior to commencing work.
Data Sheets & Downloads
Looking for a data sheet or an installation guide for our PROCLAD100™ product range, then the following downloads might come in handy.