PROCLAD350™ PLUS
The Premium All Weather Zero-perm Jacketing & Cladding System
PROCLAD350 PLUS™ is the premium multi-layered zero-perm laminate jacketing system, which provides a weatherproof cladding and jacketing solution to insulated duct and pipe systems. The laminate 6-ply has a zero-perm rating to prevent moisture ingress and with increased strength and UV resistance, PROCLAD350 PLUS™ provides a market leading solution. The increased durability with its unique memory effect helps to absorb impacts without deformation or damage providing long term performance and a great appearance.
Characteristics
Please find below the key characteristics of our PROCLAD350™ premium zero-perm weatherproof jacketing product. For more information and enquiries please get in touch.
PROCLAD350 PLUS™ Data
| Item | Value |
|---|---|
| Product Thickness | 350 microns |
| Tensile Strength | >285 newtons |
| Elongation | >35% |
| Water Permeability | 0.00 g/m2/d |
| Puncture Resistance | >125 newtons |
| Service Temperature | -25˚C to +75˚C |
| Application Temperature | -25˚C to +75˚C |
| Emissivity Value | 0.03 to 0.84 |
| UV Testing | 10 years plus |
| Fire Rating | EN 13501 |
Video Showcase
PROCLAD350 PLUS™ Questions
Product Range & Sizes
| Name | Colour | Width(mm) |
|---|---|---|
| PROCLAD 350B | Black | 600, 1000† & 1200† |
| PROCLAD 350EMB | Silver | 600, 1000† & 1200† |
| PROCLAD 350G | Grey | 600, 1000† & 1200† |
| PROCLAD 350S | Silver | 600, 1000† & 1200† |
| PROCLAD 350W | White | 600, 1000† & 1200† |
†Available in both adhesive and non-adhesive form.
All rolls are available in 25m lengths
Coverage
| 1 x 600mm roll equates to 15m² 1 x 1000mm roll equates to 25m² 1 x 1200mm roll equates to 30m² |
Surface Preparation
Ensure all surfaces are dry and clean, free from dirt and dust, grease, oil and silicones. The insulation materials should be installed to industry standards and sealed using one of ProTech Global’s aluminum foil tapes, GT30HT or GTR55.
Application
When applying PROCLAD350™️ ensure that the correct pressure is applied using the plastic
When applying PROCLAD350™️ ensure that the correct pressure is applied using the plastic applicator (provided) as the adhesive is a PSA and requires a firm application to provide a full surface bond.
When placing the cut piece of PROCLAD350™️ in to position, partially peel back the liner to allow correct positioning and then rub down, continue to peel back the liner whilst pressing in to place using the hand to prevent creasing, once the full piece has been applied use the plastic applicator and rub the complete surface to ensure the full adhesive bond required.
Continue to apply PROCLAD350™️ ensuring that a minimum 75mm overlap is observed to the previous piece to ensure a strong weatherproof seal.
Method Statements
ProTech Global Ltd provides detailed method statements for use in various applications, and are available upon request. These must be referred to prior to commencing work.
Related Products
Data Sheets & Downloads
Looking for a data sheet or an installation guide for our PROCLAD350™ product range, then the following downloads might come in handy.
